Our Work

A stepped rectangular pocket with radiused corners opens into a deeper central cavity. Threaded upper mounting ears and a scalloped base flange provide contrasting features; the reverse face shows a stepped circular bore, an annular groove and four corner mounting holes.

An annular channel surrounds a raised central face, with two interruptions in the outer rim. Two through holes have countersunk entrances on the flat reverse face.

A large through bore and stepped cylindrical hub meet a thin flange with perimeter notches. The opposite face exposes four raised threaded bosses, four smaller holes and overlapping circular milling marks.

External circumferential grooves, an end flange and a radial hole surround a stepped internal bore. The end view reveals internal threads and concentric face recesses.

A deep rounded-square cavity with radiused corners contains a stepped central bore, a recessed back face and small drilled holes. The hollow rear stem has an external circumferential groove, notches at its opening, a radial hole and a small rectangular projection. A raised ledge runs along one side of the rear housing face.

A rounded-square outer profile surrounds a deep open cavity. The opposite end has concentric steps, an annular recess and a central bore; two small drilled holes sit on a scalloped ledge inside the cavity.

A curved central saddle connects two stepped ends with mounting holes. The reverse view reveals four semicircular edge reliefs and the contrasting machined profiles on each face.